24-volt jumper wire for Extreme Max Boat Lift Boss connects 12/24V Boat Lift Boss to two deep cycle marine batteries for 24 volt power. Cable Length: 12". Compatible with Boat Lift Boss Models: 3006.4518, 3006.4521, 3006.4524, 3006.4509, 3006.4515, 3006.4512.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

24-volt jumper wire for Extreme Max Boat Lift Boss connects 12/24V Boat Lift Boss to two deep cycle marine batteries for 24 volt power. Cable Length: 24". Compatible with Boat Lift Boss Models: 3006.4518, 3006.4521, 3006.4524, 3006.4509, 3006.4515, 3006.4512.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max 3001.2169 Boat Lift Boss Add-On 5' Extension Harness is intended for use in providing a 5' extension between the Boat Lift Boss unit and its power supply. Attaches directly into the battery cable end and the power unit end. Does not include ends to attach directly to the battery.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Battery extension cable for Extreme Max 12/24V Boat Lift Boss and 12V Boat Lift Buddy units. It can be easily connected with the ring terminals to your boat battery. The quick disconnect connector plugs right into your Boat Lift Boss. Attach one end to marine battery and the other the drive unit. Length: 5'.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The 3001.9815 Boat Lift Boss Remote Control is compatible with Generation 6, Generation 5, Generation 4 and Generation 3 (replaces black remote with gray buttons) 12/24V and 120V Boat Lift Boss units. Long range design. Easily programmed to match your frequency.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Battery Holder supports one deep-cycle battery against the frame of your boat lift, allowing you to place the power where you need it. The all-aluminum holder mounts with two stainless steel clamps to allow positioning at nearly any desired height along the lift uprights for a truly custom fit. Interior Tray Dimensions: 13-3/4" Width x 7-3/4" Depth.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with Legacy Generation 2-4 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with Legacy Generation 2-4 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with Legacy Generation 2-4 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with Legacy Generation 2-4 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with Legacy Generation 2-4 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Plugs into both 120-Volt and 12-Volt remote control systems. Your remote control operates the LED canopy lights from the boat or dock to simplify docking or loading in the dark. Extreme Max 27 LED Canopy Light for Remote Control Models is a 27 LED canopy light kit simply plugs into your remote control Boat Lift Boss. It comes with a 14 foot power cord with quick connect to the bottom of the Boat Lift Boss unit. It mounts to your canopy frame with four screws (included). May be used with cable ties or double faced tape (not included). The light kit features an automatic 5-minute shutoff when used with Boat Lift Boss units. LED count: 25. Dimensions: 12" length x 2" width. Amp Draw: 0.15. Compatible with all Generation 4 and Generation 5 units, as well as Generation 6 BT units.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with current Generation 5 & 6 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty. Compatible with Beach King, Daka, Dockrite, Dutton Lainson Closed - 5500, Extreme Max, Feighner, Lake Shore, Lakeside, Lorenz, Lund, Newmans, Pier Pleasure, Ridgeline, Shore-Mate, Shoremaster, Starr, Walks on Water, and Vibo Box Winch.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with current Generation 5 & 6 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with current Generation 5 & 6 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with current Generation 5 & 6 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with current Generation 5 & 6 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with current Generation 5 & 6 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with current Generation 5 & 6 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with current Generation 5 & 6 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Post-Mount Dual Battery Tray supports two deep-cycle batteries against the frame of your boat lift, allowing you to place the power where you need it. The all-aluminum holder mounts with two stainless steel clamps to allow positioning at nearly any desired height along the lift uprights for a truly custom fit. Interior Tray Dimensions: 29-1/2" Width x 8" Depth.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Battery extension cable for Extreme Max 12/24V Boat Lift Boss and 12V Boat Lift Buddy units. It can be easily connected with the ring terminals to your boat battery. The quick disconnect connector plugs right into your Boat Lift Boss. Attach one end to marine battery and the other the drive unit. Length: 10'.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max 3005.7284 15' Corded Boat Lift Boss Pendant Controller is an optional addition to select Boat Lift Boss Models. It is compatible with the following Boat Lift Boss models equipped with a pre-installed accessory pigtail adapter: Direct Drive Models: 3006.4509 - Generations 3&4 120V AC Key-Turn (Legacy - Discontinued), 3006.4518 - Generations 3&4 12/24V DC Key-Turn (Legacy - Discontinued), 3012.4509 - Generation 5 120V AC Key-Turn, 3012.4518 - Generation 5 12/24V DC Key-Turn, 3014.4512 - Generation 6 120V AC Bluetooth, 3014.4524 - Generation 6 12/24V DC Bluetooth. Integrated Winch Models: 3006.4571 - 5000 lbs. 120V AC Key-Turn Integrated Winch Drive System, 3006.4580 - 5000 lbs. 12/24V DC Key-Turn Integrated Winch Drive System, 3006.4647 - 7500 lbs. 120V AC Key-Turn Integrated Winch Drive System, 3006.4656 - 7500 lbs. 12/24V DC Key-Turn Integrated Winch Drive System.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with Legacy Generation 2-4 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with Legacy Generation 2-4 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with Legacy Generation 2-4 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with Legacy Generation 2-4 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Hanging Battery Tray is designed to place the power where you need it! The tray supports one deep-cycle battery from the canopy of your boat lift. It features an all-aluminum construction.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with Legacy Generation 2-4 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Extreme Max Boat Lift Boss Installation Kit is designed to deliver a clean, stable, and secure mount for your Boat Lift Boss Direct Drive unit. Compatible with Legacy Generation 2-4 models, this installation kit includes all the custom hardware needed to mount either the 120V or 12V Boat Lift Boss systems (sold separately). Built for fast setup, it allows for full installation in just 15–20 minutes. Engineered to endure harsh marine conditions, the components offer long-lasting performance and are backed by a two-year replacement warranty.

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov